Journal article
Experimental and numerical study on the mechanical behavior of the superficial layers of the face.
- Barbarino GG Department of Mechanical Engineering, ETH Zurich, IMES, Zurich, Switzerland.
- Jabareen M
- Mazza E
- 2011-03-03
Published in:
- Skin research and technology : official journal of International Society for Bioengineering and the Skin (ISBS) [and] International Society for Digital Imaging of Skin (ISDIS) [and] International Society for Skin Imaging (ISSI). - 2011
Adult
Biomechanical Phenomena
Dermis
Elasticity Imaging Techniques
Epidermis
Face
Finite Element Analysis
Humans
Magnetic Resonance Imaging
Male
Models, Biological
Subcutaneous Fat
Suction
Ultrasonography
English
BACKGROUND/PURPOSE
This paper reports a study on the quasi-static mechanical response of the superficial soft tissue of the face, in particular the skin and the superficial muscoloaponeurotic system (SMAS) plus the superficial fat. The mechanical characterization of soft tissues represents one of the main uncertainties of previously developed numerical models for face simulation.
METHODS
Two instruments based on the suction method were used for collecting experimental data: the Cutometer(®) (2 mm probe aperture diameter) and the Aspiration device (8 mm). Tests were performed in five different regions of the face (jaw, nasolabial, parotideomasseteric, zygomatic and forehead) on the same subject whose magnetic resonance imaging (MRI) scans were used to generate a full 3D finite element model of the face and for whom a series of experimental results for different loading cases are already available. The mechanical parameters of the tissue layers were determined through an inverse finite element analysis. Anatomical data (tissue layers' thickness) were determined through the analysis of a set of high-resolution MRI scans and ultrasound measurements performed in the regions tested.
RESULTS
The results of Cutometer(®) measurements show a relatively homogeneous mechanical response in different face regions, while the results of aspiration device measurements, which involve deeper tissues, show a larger variability. Mechanical model parameters of the skin and SMAS were determined for two constitutive model equations: a hyperelastic model based on the Rubin-Bodner formulation and a reduced polynomial model of second order.
CONCLUSION
The results reported in this work suggest that for simulations of the global behavior of facial soft tissue, such as craniofacial and maxillofacial surgery planning, the skin could be considered as a layer of uniform thickness and of uniform mechanical response through the different regions. Additionally, mechanical models were determined for skin and SMAS that could be used for simulations of surgical procedures requiring a distinction between these tissue layers.
This paper reports a study on the quasi-static mechanical response of the superficial soft tissue of the face, in particular the skin and the superficial muscoloaponeurotic system (SMAS) plus the superficial fat. The mechanical characterization of soft tissues represents one of the main uncertainties of previously developed numerical models for face simulation.
METHODS
Two instruments based on the suction method were used for collecting experimental data: the Cutometer(®) (2 mm probe aperture diameter) and the Aspiration device (8 mm). Tests were performed in five different regions of the face (jaw, nasolabial, parotideomasseteric, zygomatic and forehead) on the same subject whose magnetic resonance imaging (MRI) scans were used to generate a full 3D finite element model of the face and for whom a series of experimental results for different loading cases are already available. The mechanical parameters of the tissue layers were determined through an inverse finite element analysis. Anatomical data (tissue layers' thickness) were determined through the analysis of a set of high-resolution MRI scans and ultrasound measurements performed in the regions tested.
RESULTS
The results of Cutometer(®) measurements show a relatively homogeneous mechanical response in different face regions, while the results of aspiration device measurements, which involve deeper tissues, show a larger variability. Mechanical model parameters of the skin and SMAS were determined for two constitutive model equations: a hyperelastic model based on the Rubin-Bodner formulation and a reduced polynomial model of second order.
CONCLUSION
The results reported in this work suggest that for simulations of the global behavior of facial soft tissue, such as craniofacial and maxillofacial surgery planning, the skin could be considered as a layer of uniform thickness and of uniform mechanical response through the different regions. Additionally, mechanical models were determined for skin and SMAS that could be used for simulations of surgical procedures requiring a distinction between these tissue layers.
- Language
-
- English
- Open access status
- closed
- Identifiers
-
- DOI 10.1111/j.1600-0846.2011.00515.x
- PMID 21362059
- Persistent URL
- https://roar.hep-bejune.ch/global/documents/51979
Statistics
Document views: 29
File downloads: